How to find buried cables?

How to find buried cables?

Using the step voltage method, the Baoshuntong cable fault detection center adds special signals to the power cable. When the power cable leaks to the ground, a directional electric field gradient from strong to weak will be generated around the fault point on the ground. The amplitude and direction of the signal can be measured with the Baoshuntong cable fault measuring equipment along the cable path. Before and after the fault point, the galvanometer pointer points in the opposite direction, so as to find the fault point of the cable and achieve the purpose of precise positioning. Since it measures the electric field signal between two points on the ground, it is usually called the step voltage. hope this helps.

Here is a cost-effective, suitable for professionals, enough functions, easy to use, and a must-have for professionals to measure the fault of underground cables:

Underground Cable Tester, Wire Tester Portable Locator Wire Tracker , Detecting Wall and Underground Cables, Electrical Lines, Gas and Water Supply Pipeline Path

At Shopify wholesale, the website is:BUY NOW

• Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth

• Detecting and Locating breaks and short circuit in cables and electrical lines buried in wall or underground.

• 

• Detecting the laid metal tap water pipe and metal heating pipe.

• Detecting interruptions and short-circuits in floor heating.

• Detecting fuses and assigning current circuits,tracing sockets and junction boxes having accidentally been covered by plastering.

• 

• The transmitter is integrated with the function of AC/DC voltmeter, which can measure 12 to 400V AC/DC voltage on a linear basis.

• Our products are included in English, if you have any difficulties in use, you can contact us to solve it.

•